Search for Solutions. Get Support.

Follow the guide below to integrate your Denon AVR into the Haptique Config App for seamless control.

🔧 Prerequisites

• Ensure your Denon AVR and the mobile device running Haptique Config App are connected to the same local network (Wi-Fi or LAN).
• Make sure your Denon AVR is powered on.
• Important: Set your Denon AVR to manual IP mode by disabling DHCP in its network settings.

🛠 Step-by-Step Integration

1. Open Device Pool

• Launch the Haptique Config App on your mobile device.
• Tap on the Device Pool tab from the main screen.

2. Add a New Device

• Tap the “+” icon on the Device Pool screen.
• Scroll to find the Denon section.
• Tap the “+” icon next to the Denon label.

3. Auto-Discovery & Connection

• Tap Connect to begin automatic discovery of Denon AVR devices.
• Wait a few seconds for the scan to complete.
• When your Denon AVR appears in the list, tap on it.
• You may optionally rename the device.
• Tap Save to add it to your Device Pool.

4. Adding Multiple Denon AVRs

• To add more Denon AVRs, repeat the process by tapping the “+” icon in the Denon section again.
• Use the same discovery and naming steps for each unit.

✅ Assign to Rooms

• After adding your AVR, go back to the Dashboard.
• Tap on the Room tab to assign your Denon AVR to a room for organized control.

⚠️ Troubleshooting Auto-Discovery

✅ Step 1: Verify Network Connection

• Ensure both the AVR and your phone are on the same Wi-Fi network.
• Restart the AVR, router, or mobile device if needed.

✅ Step 2: Add Device Manually

• If auto-discovery fails, an Add Manually button will appear — tap on it.
• On your AVR, find its IP address via the Network Settings menu.
• Enter the IP address into the app’s manual entry field.
• Assign a device name and tap Submit.

✅ Device Added Successfully

Your Denon AVR will now appear in the Device Pool of the Haptique Config App. You're ready to control, configure, and customize it with ease.