Setting up Yamaha AVR Integration on Haptique RS90
Follow these steps to connect your Yamaha AVR to the Haptique Config App via IP control for streamlined room control and automation.
1 Prerequisites
Before you begin, confirm the following:
- Your Yamaha AVR and the phone running the Haptique Config App are on the same Wi‑Fi network.
- Your Yamaha AVR supports network (IP) control and it is enabled in the AVR settings (see your Yamaha user manual under Network Control or similar).
2 Open Device Pool
- Launch the Haptique Config App on your mobile device.
- Tap the Device Pool tab from the main screen.
3 Add a New Device
- Tap the “+” icon in the Device Pool screen.
- Scroll to the YAMAHA section.
- Tap the “+” icon next to the YAMAHA label.
4 Auto‑Discover Your Yamaha AVR
- Tap Connect to start automatic discovery of Yamaha AVR devices on your network.
- Wait a few seconds while the scan completes.
- When your AVR appears in the list, tap it.
- Optionally rename the device.
- Tap Save to add it to your Device Pool.
5 Troubleshooting Auto‑Discovery
If your Yamaha AVR does not appear during auto‑discovery, try the following:
- Verify Network Connection
- Ensure both the AVR and your phone are on the same Wi‑Fi network.
- Restart your AVR, router, and phone if needed.
- Add Device Manually
- After auto‑discovery fails, tap Add Manually.
- On your AVR, find its IP Address in the Network Settings.
- Enter this IP address into the manual entry field in the app.
- Assign a Device Name and tap Submit.
✔
Device Added Successfully
Your Yamaha AVR will now be listed in the Device Pool of the Haptique Config App. You can configure, control, and customize it according to your needs.
✓ Next Steps
- Assign the AVR to a room from the Room tab for quick access.
- Create macros to combine Yamaha commands with other devices.
